Harken CLR 1200, Руководство по установке и обслуживанию

Страница: 15 / 59

15
CLR Mooring Winch
Installation and Maintenance Manual - Mod.A
8. Installation
The winch must be installed on a flat area of the deck, reinforced if necessary to bear a load equal
to at least twice the maximum working load of the winch.
It is the installer's responsibility to carry out all structural tests needed to ensure that the deck can
bear the load.
Harken
®
assumes no responsibility for incorrect installation of its winches.
WARNING!
Before using the winch, pay attention to follow scrupulously the steps shown in the CLR
installation procedure in the sequence written below.
DANGER!
Incorrect installation of the winch may cause severe injury or death. Consult the yard that built
the boat in the case of doubt over the correct positioning of the winch.
WARNING!
Keep the columns support in the position found at the moment of the opening of the
packaging.
Remove the columns support only when indicated.
NOTE!
Before drilling the deck, check the space available below deck for the gearmotor assembly.
NOTE!
Do not use the drain plug in case the winch is installed in a peak tank already used for the
drain (the forepeak of a motor boat for example).