7
Riggers Winch 500
01/03/19
Installation
1) Check plate for damage (excessive wear, cracks, deformation)
2) Check underside of plate;
a)5 fasteners around central hole, recessed 1 mm approx.
b)Pigtail end recessed 1 mm approx.
3) Winch base securely fastened to plate (small amount of play between winch drum and base is normal)
4) Pigtail is pointing towards drum (as per diagram)
5) Stripper arm is positioned correctly depending on orientation of plate
a) Wedge is correctly positioned behind stripper arm (see diagram)
6) Winch drum can be turned by hand clockwise
7) Winch drum cannot be turned by hand counter-clockwise
8) Handle can be inserted in winch and lock-in mechanism prevents accidental removal
9) Handle can be rotated in both directions, resulting in the winch drum rotating
WARNING!
Incorrect installation of winch may cause severe injury or death. Consult equipment supplier
if in doubt about correct position of winch.
Pre-Use Checks
Содержание 500
Страница 2: ...2 Riggers Winch 500 01 03 19...
Страница 19: ...19 Riggers Winch 500 01 03 19 Parts EXPLODED VIEW 1 2 20 16 15 17 18 23 22 24 25 21 26 27 28 29...
Страница 20: ...20 Riggers Winch 500 01 03 19 Parts EXPLODED VIEW 2 2 2 1 14 13 9 10 5 6 11 30 8 3 4 6 5 7 12 19...
Страница 23: ...23 Riggers Winch 500 01 03 19...