Harken Industrial 500, Руководство по установке

Страница: 16 / 23

16 Riggers Winch 500 01/03/19
Tools You Will Need
Medium flat-blade screwdriver
Protective gloves
ASSEMBLY PLATE PROCEDURE
1. Install nut on pigtail.
NOTE. Pigtail should be installed with
no thread locker.
2. Wind pigtail into mounting hole (adjacent
to "line in" arrow) as far as possible without it
protruding through the plate.
3. Wind nut back down onto plate to lock
pigtail in place with the end of the pigtail
spiralling towards the winch line entry point
4. Remove winch handle socket.
5. Slide off the hub n°28 and the cover n°29
6. Unscrew the three screws n°27
(4 Nm/35 in-lb)
9. Note down serial number of winch and
record
7. Remove the self-tailing arm n°26 by
rotating and lifting it.
8. Lift off the drum n°22