background image

 - 

 

 

HARISON INDUSTRIAL DEHUMIDIFIER - USER'S MANUAL -  Model: HD-100BM 

2.2. INNER COMPONENT IDENTIFICATION AND WORKING PRINCIPLE 

  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Other main working components are: high efficient compressor, accumulator, magnetic 
flow control valve, evaporator coil, condenser coil, capillary tube, centrifugal fan, 
temperature sensor, humidity sensor and electrical wiring.  

 
a. Main working principle 

 
When dehumidifier is switched on, the compressor starts to work. The compressor draws in 
low-pressure and low-temperature refrigerant stream from evaporator, and compresses it 
into high-temperature and high-pressure gas. The  gas enters into condenser and is 
condensed into liquid, giving out heat. Then through capillary, the liquid is throttled into 
the evaporator, absorbs heat from the air and is evaporated into gas. The gas is drawn into 
the compressor through air intake pipe. Just in this way the refrigeration cycle is completed. 
Such a cycle repeats time and again, and refrigeration is achieved. 

 
b. Dehumidifying cycle 
 

The centrifugal fan makes wet air entering into the evaporator through air filter, then the air 
is cooled down. When the surface temperature of the evaporator is lower than the dew-point 
temperature of the air, the water content in the air is condensed and drained from the 
machine. The dehumidified air is then heated by the condenser and is discharged into the 
room by the centrifugal fan. Thus, the air goes through the cycle and the water in the air 
gets condensed so as to achieve dehumidification. 

 
c. Defrosting cycle 

 
When the environment temperature is lower ( 5

o

C - 18

o

C ) during running, the surface of 

the evaporator will be frosted due to lower temperature. The computer will judge and send 
the defrosting command automatically as the situation. After defrosting, the dehumidifier 

co

nd

ense

r

e

v

a

p

or

ator

filter

filter

capillary

ai

r st

ra

in

e

r

valve

compressor

accumulator

the flowing direction of refrigerant in defrosting cycle

the flowing direction of refrigerant in dehumidifying cycle

the flowing direction of air

Содержание HD-100BM












Отзывы: