Fig. 3
Fig. 2
Step 1
– Identify each of the 9 logs in the set by comparing them to the log picture above. (Fig 1)
Step 2
– Identify the Back Log in the log box. Place the Back log on the grate with the finished area facing forward. (Fig 1)
Step 3
–- Install the Front Logs by placing the notches on the bottom of the front logs on the corresponding grate
tines. (Fig 1)
Step 4
- We will install the top logs from left to right, install the 5312 by placing the flat side of the log on the notches on
the top of the back and front logs. (Fig 1 & 2)
Step 5
– Install the 5307 by placing the flat end on the notch of the 5312 and the notch on the front left log. (Fig 1 & 2)
Step 6
– Install the 5310 (y-shaped) by placing the flat side of the log on the notches on the top of the back log and front
left log (Fig 1 & 2)
Step 7
– Install the 5309 by placing the flat side on the notch of the 5310 and the notch on the front right log. (Fig 1 & 2)
Step 8
- Install the 5314 by placing the flat side in the notches on the top of the back log and the front right log (Fig 1 & 2)
Step 9
– Install the 5311 by placing the flat side in the notch of the back log and the front right log. (Fig 1 & 2)
Step 10 –
Assure that all of the logs have at least a 1” clearance around the burner ports of the Back Burner (Fig 2).
Step 11 –
Once the set is completely set up, observe the operation of the set.
The back flame should not be coming in
contact with any logs.
The front flame should cause a glowing effect on the ember material. (Fig 3).
9
HERITAGE CHAR (HCV) LOG DIAGRAM
24” & 30”- 5322GOVF
18” - 5320GOVF
18” - 5301GOVF
18” - 5302GOVF
24” - 5303GOVF
24” - 5304GOVF
30” - 5306GOVF
30” - 5305GOVF
5307GOVF
5310GOVF
5311GOVF
5309GOVF
5312GOVF
5314GOVF
IMPORTANT: ASSURE THAT
THE TOP LOGS ARE NOT
POSITIONED ABOVE THE 3
SETS OF BURNER PORTS.
FAILURE TO POSITION
LOGS PROPERLY MAY
RESULT IN PROPERTY
DAMAGE OR PERSONAL
INJURY!
LOG INSTALLATION
Fig. 1
Fig. 2
