２
2.2 Installation of the latch and strike plate
1.Adjust the length of latch to match the
hole size(60mm or 70mm).
2.Insert the latch in the hole with the
beveled edge of the latch facing the door
frame and tighten screws.
3.Install the bottom case and strike plate
on door jamb.
2.3 Installation of the outer lock
1.Remove the metal plate which on the
back side of the inner lock.
2.Adjust the direction of square groove
which on the back side of the outer lock.
Make sure the arrow pointing upward.
3.Put the silicone sheet under the outer
lock. Put the data line through the door
hole. Install the outer lock to door.
4.Insert the square shaft through the
square hole which on the latch and into
the groove which on the back side of the
outer lock.
5. Put the silicone sheet under the metal
plate and install it to door. Fix 2 long
screws.
