Use the downrod supplied with fan,
remove clamp pin(l) and cross pin(2)
form downrod(3).
Place downrod assembly(l) into
canopy(2)and yoke cover(3). Feed motor
wires through the downrod assembly(l).
Insert downrod into downrod coupling. Make sure to align hole in downrod with the hole in
downrod coupling. Install cross pin(l) through coupling and downrod. Insert keeper pin(2) into
cross pin until it snaps into place. Tighten set screws(3) in
Slide coupling cover(4)over
the downrod coupling.
Page 6
