2.
remote control is ready for use after battery installation
-
remote is to use 1 x9V battery.
3.
of transmitter
HI : Turn on ceiling fan at high speed.
MED : Turn on ceiling fan at medium speed.
LOW : Turn on ceiling fan at low speed.
OFF : Turn off ceiling fan.
ON/OFF: Press and release immediately to turn on / off the light;
of transmitter wall mount holder with two
O P E R A T I O N AND MAINTENANCE
Operation
Turn on the power and check operation of fan.
Speed settings for warm or cool weather depend on factors such as room size, ceiling
height, number of fans and so
The slide switch controls direction, forward or reverse.
Warm weather/down position- (Forward) Fan turns counterclockwise direction.
A downrod air flow creates a cooling effect as shown in illustration A.
This allows you to set your
conditioner on a higher temperature setting without
affecting your comfort.
Cool weather/up position-(Reverse) Fan turns clockwise direction. An upward airflow
moves warm air off the ceiling area as shown in illustration B.
This allows you to set your heating
on a lower setting without affecting your
comfort.
off and wait for fan to stop before changing the setting of the
forward/reverse slide switch.
Maintenance
Because of the fan's natural movement, some connections may become loose. Check the support
connections, brackets, and blade attachments twice a year. Make sure they are secure.
2. Clean your fan periodically to. help maintain its new appearance over the years. Do not use water
when cleaning.
3. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a
lacquer coating to minimize discoloration or tarnishing.
4. There is no need to oil your fan. The motor has permanently lubricated bearings.
Page 10
