I N S T A L L A T I O N
Install light bulbs((13 watt max, bulb not
included).
Locate the indentations on the neck of the
glass and align with the protrusions on the
inside of the light kit. Lift the glass up
allowing the protrusions to engage the
indentations of the glass, and twist the glass
clockwise to lock into place.
R E M O T E C O N T R O L O P E R A T I O N
This remote control is preset up a pair
codes when being manufactured. Codes are set by
pushing dip switches up or down. It is imperative that the code used for both transmitter and
receiver is exactly the same, otherwise remote controller will not work. Please note the code
switch will enable you to operate a second remote controller independently. For example, if you
have t w o ceiling fans with 2 remote control units, set 2 different codes for each set of
transmitter/receivers. This means you can operate
ceiling fan independently.
TO OPEN BATTERY HOUSING
COVER BY PRESS DOWN AND
SLIDE OUT
Page 9
