background image

 

 

Thank you for purchasing a HARDKORR product. Manufactured to a high standard, this product will, if used 

according to these instructions and maintained properly, give you years of trouble free performance!

PLEASE NOTE, THIS INVERTER SHOULD NOT BE USED IN CONNECTION WITH LIFE SUPPORT 

SYSTEMS AND OTHER PRECISE MEDICAL EQUIPMENT OR DEVICES!

BEFORE USING INVERTER, PLEASE READ THIS USER MANUAL!

PURE SINE WAVE INVERTER 

HKPINV300 | HKPINV600 | HKPINV2000

 

BATTERY SAFETY

BATTERY AND INVERTER  SAFETY

- Beware, lead-acid batteries generate explosive gases during normal battery operation.
- Wash with soap and water immediately if battery acid contacts skin or clothing. 
- If acid enters eye, flush immediately with cool,clean running  water for at least 15 minutes and seek 
   immediate medical attention.

- Do not allow smoke or a spark/flame in the vicinity of the battery or engine. 
- If the battery terminals are corroded or dirty, clean them before attaching the leads.

- To prevent the risk of sparking, short circuit and possible explosion DO NOT drop metal tools in the battery area, 
   or allow them to touch the battery terminals.
- Before attaching to battery, remove personal metallic items such as rings, bracelets, necklaces and watches.  
   A lead acid battery can produce a short-circuit current which is high enough to weld such items and 
   cause severe burns.

- Do not expose inverter to rain, snow, spray, bilge or dust. 
- Do not cover or obstruct ventilations.           
- Make sure at least 10CM of clearance around inverter for air flow. Minimum air flow of 145CFM is required.  
- Make sure existing wiring is in good electrical condition. 
- DO NOT operate inverter with damaged or substandard wiring.  
- DO NOT install in compartments containing batteries or flammable materials or in locations which require 
   ignition protected equipment.  
- DO NOT disassemble this inverter charger. Internal capacitors remain charged after all power is disconnected.  
   Attempting to service this inverter by yourself may cause electrical shock or fire.
- The output side of inverter’s AC wiring at no time is to be connected to public power or a generator. 
   Beware the wiring connection. 

GENERAL INFORMATION

HKPINV

 inverters are a pure sine wave inverter. 

Pure sine wave inverters are best for use on medical equipment and sensitive electrical appliances.
Unlike the modified sine wave inverter, pure sine wave allows you to watch television without static, play games 
on consoles and run a fluroescent light, all of which may not operate properly on a modified sine wave inverters
Safety is paramount and in particular with inverters which is why HARDKORR electrically isolates the DC current 
from the 240VAC circuit.

APPLICATIONS

Power tools- circular saws, drills, grinders, sanders, buffers, weed and hedge trimmers, air compressor etc.
Office equipment- computers, printers, monitors, facsimile machines, scanners etc.
Household appliances- vacuum, fans, lights, TV, refrigerator, microwave, coffee machine, toaster, blender etc.
Industrial equipment- metal halide lamp, high pressure sodium lamp etc.
   

 

 

 

 

  

 

 

   

 

PAGE 1

HARDKORR.COM

LONG LIFE HIGH POWER

 

 

Содержание HKPINV300










Отзывы: