background image

4

GENERAL INFORMATION 

AND SAFETY (CONT.)

WARNING

Failure to follow these instructions may result in personal or property 
injury, as well as reduced battery life or battery failure.

•  Do not use this battery for cranking applications.
•  Do not submerge the battery in water.
•  Do not short circuit the battery terminals.
•  Do not puncture, impact or drop the battery.
•  Do not disassemble the battery. Opening the case may cause electric 

shock or fire and will void your warranty.

•  Do not expose the battery to fire, sparks, high voltage or 

temperatures in excess of those stipulated in the specifications table 
of this manual.

•  Do not series or parallel connect more than six (6) of these batteries 

together. Ensure that connections are made correctly as per the 
“Usage and Storage” section of this manual. Do not connect this 
battery to batteries with different chemistries.

•  Do not store the battery at a voltage lower than 11.5V.
•  Endeavour to keep the battery above 20% SOC where possible.
•  Observe the limitations of this battery as stipulated in the 

specifications table of this manual, paying particular attention to 
maximum charge and discharge currents.

•  To charge the battery, you must use a charger with a specific 

charging profile for lithium batteries. Your warranty may be reduced 
or voided if you use an unsuitable charger.

•  If the battery emits any unusual smells, appears to be atypically hot, 

shows signs of distortion or displays any other abnormality during 
operation or storage, discontinue use immediately and contact 
Hardkorr for assistance.

Содержание 135AH LiFePO4

























Отзывы: