HARDKORR 135AH LiFePO4, Инструкция по эксплуатации

Страница: 10 / 24

10
SETUP AND STORAGE
(CONT.)
CONNECTION - MULTIPLE BATTERIES IN PARALLEL
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
+POS
-NEG
Earth / battery monitor shunt
Main fuse
You may connect up to six (6) of these batteries in parallel. This will create
a single system in which the total capacity is the sum of the capacities of the
individual units and the nominal voltage is equivalent to the voltage of one
unit e.g. 3 x 135Ah 12.8V batteries in parallel gives a 405Ah 12.8V system.
When connecting batteries in parallel, you should take the negative
connection from the opposite end of the battery bank to the positive
connection, as per the below diagram. When wired this way, the effect of
resistance in the positive and negative wires cancel each other out, helping to
equalise charge and discharge rates for each unit.
Batteries connected in parallel should be disconnected and charged
individually on an annual basis.
Before connecting multiple batteries in parallel, ensure that all batteries
are fully charged. Do not connect batteries that are mismatched in voltage,
capacity, age or chemistry. Use cables of appropriate size for the system.
CAUTION