Hardkernnel ODROID-C2 Скачать руководство пользователя страница 35

Страница: 35 / 95

ODROID C2 USER MANUAL

Other differences are that the block size (bs) parameter for the

dd command is in lowercase, and the USB adapter’s device name is in

the format /dev/diskX. Before writing the image to SD Card or eMMC

module using the “dd” utility, run the command “diskutil” to determine

the device name, then unmount it:

$ diskutil list

$ diskutil unmountdisk /dev/diskX

$ sudo dd of=/dev/diskX bs=1m \

if=./selfinstall-odroidc-eng-s805_4.4.2_dev_master-195-v1.2.img

Inserting the eMMC Module or SD Card

Now that the desired image has been flashed on to the boot me-

dia, it’s time to insert the boot media into the appropriate port on the

ODROID-C2.

Ensure that the work area is clear of unnecessary items. Wear

the grounded wristband. Touch a metallic surface, like that of your desk-

top. Then, open the ODROID-C2 packaging box. Place the anti-static

bag containing the ODROID-C2 board, on to the non-conductive work

surface. Open the bag and remove the board, holding the edges. Avoid

touching any of the components, peripheral connectors, ports, exposed

circuits or on board solder. Place the board on the work surface, with

the bottom side up. Check the annotated diagrams and follow the in-

structions from Chapter 1 for inserting the eMMC module or SD card.

Powering Up

Before powering the board, attach all peripherals as described in

Chapter 1. Insert the power cable, which will be indicated by the red

LED lighting up, and wait for the image to boot to desktop. It will take

anywhere from 20 seconds to 2 minutes for the desktop to appear,

depending on the operating system and the type of boot media used.

Troubleshooting

Red LED not glowing

If the red LED is not glowing, power is not being supplied to the

board. Check the connections, and verify that the plug is inserted

properly. Also, make sure that a 5V/2A power supply is being used,

and that it is plugged in.

Blue LED not flashing or glowing

If the blue LED is not flashing or glowing at all, something went

wrong with the image writing or the card is not correctly inserted. Try

to download, extract and write the image again. If that doesn’t solve

the issue, try downloading and flashing a different image.

Chapter 2

Содержание ODROID-C2
































































































Результаты поиска

Содержание ODROID-C2

Отзывы:

Похожие инструкции для ODROID-C2

Бренды по названию

Популярные бренды

Hardkernnel ODROID-C2, Руководство пользователя

Результаты поиска

Содержание ODROID-C2

Отзывы:

Похожие инструкции для ODROID-C2

Бренды по названию

Популярные бренды