82
ODROID-XU4 USER MANUAL
Make sure that no other videoconfig or vout value is set. The
rest of the related settings should be commented out. Save these new
settings and shut the system down.
Reconnect the XU4 to the VU5 display, with the touch interface
USB cable attached to the USB port on the XU4. Power up the as-
sembly and login to the desktop. The assembly will appear as shown
in the image above.
Heat Sink
While the standard fan-based active cooler is very effective in
dissipating heat from the CPU, it can be a noisy option. Noise increas-
es as the fan speeds up under heavy load. If you want a low noise
option, you could use a heat sink. While it is installed, you may notice
the system throttling due to excessive heat, in which can you can re-
duce the maximum CPU clock speed to 1.4 GHz.
XU4 with heat sink
The steps required to install the heat sink are available at http://bit.
SmartPower2
Hardkernel has developed the next generation SmartPower2
accessory with an input of 15V 4A and an output of 5.3V 1A (USB
host port) and 5A (terminal block). The latter can be used to power an
XU4. The SmartPower2 can be accessed via WiFI and used to control
the output voltage and power ON/OFF of a connected device, like the
XU4. You can monitor the power profile via a smartphone, tablet or
PC.
It can be used in three operation modes:
• WiFi Standalone
• WiFi Connected
• Telnet Connected
Содержание ODROID-XU4
Страница 1: ...rev 20170310 ODROID XU4 USER MANUAL ...