HARDKERNEL ODROID-XU4 Скачать руководство пользователя страница 19

Страница: 19 / 92

ODROID-XU4 USER MANUAL

Is there any analog audio output or input?

Not on the board itself, but you can use our USB Audio Adapter for

analog audio.

Is there an I2S port to connect a HiFi DAC?

No.

What is an eMMC module?

The eMMC module is a NAND flash-based storage IC which is mount-

ed on a custom PCB for easier upgrade/replacement, and is much fast-

er than SD card. The transfer rate of a typical eMMC is approximately

65MB/sec, while a microSD UHS-1 card is approximately 30MB/sec.

Do you have a SATA port?

No, but you can use a SATA-to-USB bridge device.

Which power adapter should I use?

The ODROID-XU4 consumes less than 1A in most cases, but it can

climb to 4A if many passive USB peripherals are attached directly to

the main board. It is recommended to use the Hardkernel 5V/4A PSU

or USB-to-DC Plug cable with a 5V/4A charger. Due to the limited

power output from a computer’s USB port, we suggest only powering

the ODROID-XU4 with a good quality 5V/4A PSU.

What operating system (OS) does it use?

We recommend Android and Ubuntu as our default distribution. The

OS is stored on the SD-card / eMMC.

Which Android and Ubuntu version are included?

Android 4.4.x and Ubuntu 16.04, which both run on the Linux kernel

3.10 LTS. Newer OS and kernel versions will be made available on

the XU4 wiki at

http://bit.ly/1kMUC27

as they are developed.

Which OpenGL and OpenCL versions are included in Android

and Ubuntu?

OpenGL ES 1.0, 2.0, 3.0 and 3.1 are included. OpenCL is also fully

supported.

Where is the OpenGL ES SDK?

Refer to the ARM Mali Developers site at http://bit.ly/1FRJEi0 for infor-

mation on OpenGL ES.

Is the full source code open, and can I build it by myself?

Chapter 1

Содержание ODROID-XU4





























































































Результаты поиска

Содержание ODROID-XU4

Отзывы:

Похожие инструкции для ODROID-XU4

Бренды по названию

Популярные бренды

HARDKERNEL ODROID-XU4, Руководство пользователя

Результаты поиска

Содержание ODROID-XU4

Отзывы:

Похожие инструкции для ODROID-XU4

Бренды по названию

Популярные бренды