Hardinge Talent 10/78, Руководство по обслуживанию

Страница: 37 / 104

CHIP REMOVAL
(Machines without Chip Conveyor)
TALENT
®
6/45 AND 8/52 LATHES
1. Power down and lock out the machine. Refer to
the appropriate power-down procedure in
Chapter 1.
2. If coolant was ON, wait a few minutes to allow
any coolant that was in use to drain back into
the tank.
3. Open or remove chip tray cover “C”, Figure 4.3.
- WARNING -
Do not remove chips with your bare
hands.
4. Rake the chips into a suitable container.
5. Close or replace chip tray cover “C”.
TALENT 8/66 AND 10/78 LATHES
1. Power down and lock out the machine. Refer to
the appropriate power-down procedure in
Chapter 1.
2. If coolant was ON, wait a few minutes to allow
any coolant that was in use to drain back into
the tank.
3. Roll the coolant tank from the front of the
machine.
4. Remove two mounting bolts "D", Figure 4.4.
- WARNING -
Do not remove chips with your bare
hands.
5. Rake the chips from chip pan "E" into a suitable
container.
6. Align the tank with the machine and roll it into
place.
M-448B 4-5
Figure 4.3 - Chip Tray Cover
C
TP5248
Figure 4.4 - Chip Pan Mounting Bolt
and Chip Pan
D
E
TP6030