Hardi SARITOR 4000, Руководство оператора

Страница: 57 / 94

5 - Operation
55
Filling chemicals via the TurboFiller
1. Fill the Main Tank at least 1/3 with water (unless something else is
stated on the chemical container label).
2. Press electric Main Tank Valve on the external control panel, to turn
it on.
3. Turn on the ChemFiller/Ejector valve to chemFiller. This will
activate the TurboFiller.
4. Turn on the Spray Pump from the external control panel.
5. Increase the engine rpm to 1500.
6. Open the TurboFiller lid. Open the TurboDeflector valve.
7. Measure the correct quantity of chemicals and slowly add it into
the hopper only as fast as the transfer device can flush it down.
8. If the chemical container is empty, it can be rinsed using the
Chemical Container Cleaning device. Place the container over the
multi-hole nozzle and push the upper lever to the left of the
TurboFiller.
9. Close the TurboFiller lid when finished.
€
DANGER! Always wear face shield and other appropriate personal safety equipment when filling chemicals.
€
DANGER! Do not press the lever for the Chemical Container Cleaning device unless the multi-hole nozzle is covered
by a container or the TurboFiller lid is closed to avoid spray liquid hitting the operator.
Rinsing TurboFiller
10. Turn off the Main Tank Valve from the external control panel.
11. Turn on the Rinse Tank Valve from the external control panel.
12. Check to make sure the TurboFiller lid is securely closed.
13. Rinse the hopper by using the Control valves on the TurboFiller,
then turn them off.
14. Turn off the Rinse Tank Valve from the external control panel.
15. Turn off the Chemical Induction Valve.
16. Continue filling the Main Tank.
Prepare sprayer for Spraying
1. Before entering the cabin, turn the Ejector Spray valve to Spray
position. The rest of the functions for spraying can be controlled
from the cabin.