manualshive.com logo in svg

Hardi NAVIGATOR 4000, Инструкция

Поделиться
Скачать
Hardi NAVIGATOR 4000 Скачать руководство пользователя страница 7

5

2 - Safety notes

Operator safety

Introduction

This manual contains safety information which could prevent crop damage, personal injury or death. It is compulsory that all
operators intending to use this equipment read and understand this manual and related literature. Safety information in each
section must be read carefully, and if any doubt remains contact your HARDI dealer for further information.

Symbols

These symbols are used thorough the book to designate where some sort of extra attention has to paid for the reader. The 
four symbols have following meaning.

€

This symbol means DANGER. Be very alert as your safety is involved!

±

This symbol means WARNING. Be alert as your safety can be involved!

μ

This symbol means ATTENTION. This guides to better, easier and more safe operation of your sprayer!

÷

This symbol means NOTE.

Precautions

Note the following recommended precautions and safe operating practices before using the sprayer.

General info

€

Read and understand this instruction book before using the equipment. It is equally important that other operators 
of this equipment read and understand this book.

If any portion of this instruction book remains unclear after reading it, contact your HARDI dealer for further 
explanation before using the equipment.

€

Local law may demand that the operator is certified to use spray equipment. Adhere to the law.

€

Tractor drivers seat is the intended working place during operation.

€

Wear protective clothing. Clothing may differ depending on chemical being sprayed. Adhere to the local law.

Wash and change clothes after spraying. Wash tools if they have become contaminated.

€

Do not eat, drink or smoke while spraying or working with contaminated equipment.

In case of poisoning, immediately seek medical advice. Remember to identify chemicals used.

Filling and spraying

€

No persons are allowed in the operations area of the sprayer. Be carefull not to hit people or surroundings when 
manoeuvring the sprayer, especially when reversing.

€

Slow down when driving in uneven terrain as the machine might be in risk of turning over.

€

Keep children away from the equipment!

€

Do not attempt to enter the tank.

€

Do not go under any part of the sprayer unless it is secured. The boom is secure when placed in the transport 
brackets.

Содержание NAVIGATOR 4000





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды