Hardi NAVIGATOR 4000 Скачать руководство пользователя страница 10

Страница: 10 / 116

2 - Safety notes

Label explanation

The labels are designating potential dangerous places on the machine. Anybody working with or being in close range of
the sprayer must respect these labels!

The labels should always be clean and readable! Worn or damaged labels must be replaced with new ones. Contact your
local dealer for new labels.

Note that not all labels shown here will apply to your sprayer.

Chemical handling!

Carefully read the informations about
chemical preparation before handling the
machine. Observe instructions and safety
rules when operating.

Service!

Carefully read operators instruction book
before handling the machine. Observe
instructions and safety rules when operating.

Service!

Shut off the engine and remove ignition key
before performing maintenance or repair.

Service!

Tighten to torque according to instruction
book.

Risk of death!

Do not attempt to enter tank.

Risk of burn!

Stay clear of hot surfaces.

Risk of injury!

Do not open or remove safety shields while
engine is running.

Risk of injury!

Flying objects, keep safe distance from
machine as long as the engine is running.

Risk of injury!

Keep sufficient distance away from electrical
power.

Risk of injury!

Keep hands away.

Risk of squeeze!

Stay clear of raised unsecured loads.

Risk of squeeze!

Never reach into the crushing danger area as
long as parts are moving.

Risk of squeeze!

Keep hands away, when parts is moving.

Risk of falling off!

Do not ride on platform or ladder.

Risk of sprayer tipping over!

Be aware when disconnecting the sprayer.

Grip area!

Manual handling of boom etc.

Not for drinking!

This water must never be used for drinking
water.

Not for drinking!

This water must never be used for drinking
water.

Содержание NAVIGATOR 4000





















































































































Результаты поиска

Содержание NAVIGATOR 4000

Отзывы:

Бренды по названию

Популярные бренды

Hardi NAVIGATOR 4000, Инструкция

Результаты поиска

Содержание NAVIGATOR 4000

Отзывы:

Бренды по названию

Популярные бренды