Page 31 of 87
Use the protractor, (72547300), to measure
the maximum right angle
Key in values in E.8.4.2.2.2.3 as shown.
S: Value from rear sensor.
C: This is the actual physically measured
value with the protractor.
Use the arrow keys to chance the value,
finish with ENTER, and continue with the
calibration.
E8.4.2.2.
3
- - >
Readout and setting right extreme
Do the same for the left angle in menu
E8.4.2.2.
4
< - -
Note the measured values inside the
JobCom lid.
In case of master reset the calibrations
procedure must be done again.
H=right
L=left
