Hardi HC 8600 Скачать руководство пользователя страница 201

Страница: 201 / 212

8 - Technical specifications

199

Image File Types

•

.png and .bmp
Supported file formats for the Display Owner Image. File size is limited to a maximum of 200 pixels wide by 100 pixels

tall. Import the file from the Import Image button on the Display screen’s General tab.

System File Types

•

.ibk
System backup file. Backup files are written to the USB drive by pressing the Create Backup button on the Display Setup

screen’s Advanced tab.

•

.ilf
System log file. Created with the Copy Data button on the External Storage Operations screen or pressing the Export

Data Files button of the Display screen’s Advanced tab.

•

.fw2
Firmware upgrade file for the display and control modules. Install firmware updates from the USB drive by pressing the

Upgrade Firmware button on the External Storage Operations screen. The External Storage Operations screen can be

accessed by pressing the External Storage Operations button on the Home screen.

•

.msf
The .msf (Management Setup File) file format allows the display to import Grower and Field information from SMS

software via the USB drive.

•

.ref
Variety reference map file. SMS software uses planting data to create a variety reference map which is saved as a .ref

file. This .ref file can then be exported to the display for use with the Automatic Variety Tracking and Automatic Region

Changing features.

NOTE! Legacy Reference files (.ref) will not be supported in 3.0.

NOTE! IBK, MSF are not supported in 3.0. Use the new .IBK2 format for backups in 3.0. IBK2 will continue to be specific

to a particular display model. Version 3.0 will not restore from an “IBK” from previous releases.

Содержание HC 8600





















































































































































































































Результаты поиска

Содержание HC 8600

Отзывы:

Hardi HC 8600, Руководство оператора, Страница: 201 / 212

Результаты поиска

Содержание HC 8600

Отзывы: