manualshive.com logo in svg

Hardi HC 8600, Руководство оператора, Страница: 171 / 212

Поделиться
Скачать
Hardi HC 8600 Скачать руководство пользователя страница 171

5 - Operation

169

After the survey points have been collected, they 

will be converted into a surface layer in which you 

can define the color scheme Red, White, Blue, or 

Brown-Tan. See “Legend Settings” on page 22.
You can select the number of legend ranges for 

your field that will show the areas desired. This 

theme will be used for each field until changed.
Hues will represent:

Red, white, blue scheme

Darker blue = Lower elevation.
Darker red = Higher elevations.
White will be a transition color between.

Brown-Tan scheme

Dark brown = Lower elevations.
Tan = Higher elevations.

If at any point during collection your GPS correction status changes out of RTK fixed, logging will be suspended.
If you re-acquire the RTK signal, logging will automatically resume.
At any point you can:

•

 Pause.

•

 Stop collection of the elevation survey.

•

 Resume as needed.

If you forget to stop logging as you leave the field, you will be prompted with the message that data collection is still active, 

and be given the option to continue logging, or end operation.

÷

NOTE! In Odd-shaped fields, the surface 

rendering of the elevation will connect 

areas (A) even if you haven’t driven through 

that area.

No Product

Topography

No Product

Topography

Содержание HC 8600





















































































































































































































Отзывы:

Нет отзывов