Hardi HC 8600 Скачать руководство пользователя страница 136

Страница: 136 / 212

4 - System setup

134

Once connected to “HC 8600/9600” proceed

to open the AgFiniti Mobile app.

NOTE! Download AgFiniti Mobile from the

Apple App store.

Once AgFiniti Mobile is open, it will

automatically attempt to connect to the HC

8600/9600 display.

10.

Once the HC 8600/9600 display has been found, the display will prompt user to

allow connection to happen.

NOTE! This should only happen once per device. Once a device has been

recognized, the device credentials are stored in the display (wait up to a minute

after opening the app for this to occur).

11.

After pressing the green check mark the mobile device will begin accepting data from the

display as it becomes available. This is indicated by the device symbol within the AgFiniti

status indicator on the top right corner of the screen.

At this point your HC 8600/9600 display and iPad are connected and ready for data transfer. If there are any closed or

suspended events present on the HC 8600/9600 display, they will be transferred to the iPad once the app is opened.

Messages

Mail

Safari

Do you want to allow “My iPad” to access

logged data?

AgFiniti Mobile

Содержание HC 8600





















































































































































































































Результаты поиска

Содержание HC 8600

Отзывы:

Hardi HC 8600, Руководство оператора, Страница: 136 / 212

Результаты поиска

Содержание HC 8600

Отзывы: