Hardi HC 6500, Инструкция, Страница: 22 / 92

3 - Description
3.10
Auto functions
General info
The Soft key buttons F1, F2, F3 and F4 are used for the Auto functions. Currently, only F3 (End Nozzles) is available in North
America. See menu tree in chapter “Soft keys”.
End nozzles (Fence line) (optional)
If End nozzles/Bijet are fitted, set the value to the equivalent coverage by the boom nozzles. E.g. End nozzle coverage is 5
feet. This is equal to [03 Boom nozzles]. Choose End Nozzles by pressing F3. When end nozzle is active, it will be shown in
the display with icons in the end of the boom line.
Set up of end nozzles/Bi-jet can be done from menu 3.3.4.
μ
ATTENTION! It is important that the volume applied from the end nozzle or Bijet matches the volume applied under
the boom. This is a comparison of volume per minute per length. (Gallon/min/foot).
When the end nozzle or Bijet is active, the area covered and volume sprayed is calculated and registered. If “Active
boom size” is displayed, it will show an increase when the end nozzle or Bijet is activated.
TWIN Preset
It is possible to set the air volume and air angle in 2 different positions in menu 2.2.5 to 2.2.5.2, for headwind and tailwind.
When air volume and air angle are set, a long key press (position 1 headwind) will store the present setting. The same setting
can be done for (position 2 tailwind). TWIN preset can be set up so it will shift automatically from position 1 to position 2
when the main ON/OFF is activated.
HARDI® AutoSectionControl
HARDI® AutoSectionControl is a fully automatic system that opens and closes booms sections as necessary. HARDI®
AutoSectionControl manages the sections when driving over sprayed area like into a headland or wedge or around
obstacles like trees etc.
HARDI® AutoSectionControl is a small module connected to the HC 6500 and to a GPS receiver.
When spraying, the HARDI® AutoSectionControl automatically records the area sprayed. In a typical situation where the
headland is sprayed first,
HARDI®
AutoSectionControl will now automatically close the sections if the operator passes over
a sprayed area.