Hardi Delta Force Boom, Руководство оператора

Страница: 22 / 56

5 - Operation
20
Maneuvering of the boom - DELTA FORCE
Applicable for HC 8600 / HC 9600 / ISOBUS.
±
WARNING! Boom folding is not possible if the center is unlocked. A manual override of the center lock is possible by
activating switches 2 or 3 on the SetBox or switch 4 on the self-propelled instrument panel.
±
WARNING! Only operate the folding functions when the sprayer is stationary! Failure to do so may damage the boom.
˜
ATTENTION! If a folding sequence is not completed, a warning message on the Hardi® display will ask you to complete
this sequence before starting next sequence.
˜
ATTENTION! Only buttons relevant for boom functions are mentioned here.
To unfold the boom using the SetBox & Grip controls (Trailed models)
1.
Press the boom lift button (H) to lift the boom clear of the transport
brackets.
2.
Press and hold (A) and (C) to tilt boom wings up, if needed.
3.
Check that the center locked symbol is visible in the display. If
not, press button (3) to engage the center lock. Press and hold
button (5) to unfold the inner sections completely (approximately
5 sec. or a warning will appear).
4.
Press and hold (B) and (D) to tilt boom wings down until level.
5.
Press and hold button (7) to unfold the 1st outer sections.
6.
Press and hold button (9) to unfold the 2nd outer sections (120’-
132’ tri-fold booms only).
7.
Press and hold the boom down button (I) to lower the boom to the
correct working height.
8.
Press button (2) and symbol appears in display when the
center is unlocked.
To fold the boom using the SetBox & Grip controls (Trailed models)
1.
Press the boom lift button (H) to raise the boom to the highest
possible position.
2.
Press button (3) to engage the center lock. The symbol appears
in display when center is locked.
3.
Press and hold button (8) to fold the 2nd outer sections (120’-132’
tri-fold booms only).
4.
Press and hold button (6) to fold the 1st outer sections. Check that
the center lock symbol
is visible in the display.
5.
Press and hold (A) and (C) to tilt boom wings up until they reach the alignment indicators.
6.
Press and hold button (4) to fold the inner sections.
7.
Press the boom down button (I) to lower the boom until it rests in the transport locks.
÷
Press and hold (B) and (D) to tilt boom wings down into the transport rests if necessary.
A
B
E
I
H
C
F
G
D