manualshive.com logo in svg

Hardi COMMANDER TWIN FORCE 3200, Инструкция, Страница: 16 / 110

Поделиться
Скачать
Hardi COMMANDER TWIN FORCE 3200 Скачать руководство пользователя страница 16

3 - Description

3.2

ATTENTION! Max. driving speed is 25 km/h for models without brakes and 40 km/h for models equipped with bra-
kes. Be aware that this may differ due to local law. Contact local authorities for information of max. driving speeds.

25. Distribution valves

26. Rinsing tank

27. Main tank

28. ChemLocker or FoamMarker tank

The HARDI sprayer is for the application of crop protection chemicals and liquid fertilisers. The equipment must only be
used for this purpose. It is not allowable to use the sprayer for other purposes. If no local law demands that the operator
must be certified to use spray equipment, it is strongly recommended to be trained in correct plant protection and in
safe handling of plant protection chemicals to avoid unnecessary risk for persons and the environment when doing your
spray job.

When driving on public roads and other areas where the highway code applies, or areas where there are special rules
and regulations for marking and lights on implements, you should observe these and equip implements accordingly.

29. Hose reel for External Cleaning Device

30. CycloneFilter

31. Parking brake

Roadworthiness

Sprayer use

View

Содержание COMMANDER TWIN FORCE 3200















































































































Отзывы:

Нет отзывов