Hardi COMMANDER Plus 1200, Руководство оператора

Страница: 28 / 72

26 HARDI ® COMMANDER OPERATOR’S MANUAL
Filling the tanks on the COMMANDER Plus
The main tank and flush tank can be filled in two ways:
1. Filled through tank lid.
2. Filled with external Quick Fill (optional), which
enables the connection to a nurse tank.
The main tank should normally be filled 1/3 with water,
before adding the chemicals - always read instruction
on chemical container!
IMPORTANT! If the sprayer is stored with liquid in the
main tank, all MANIFOLD valves must be closed.
To operate the spraying functions:
• Turn the handle on a green pressure valve towards
the desired function
• Turn the handle on a black suction valve towards the
desired function
• Open or close yellow disc (self-cleaning filter)
• Close all remaining valves by setting the handle(s)
on “ O ”
Note: If a MANIFOLD valve is too tight to operate - or
if it is too loose (= liquid leakage), the 3-way-valve
needs to be serviced. Please see the part
“Adjustment
of 3-way-valve (suction)” (p. 50) for further information.
Correct setting is when the valve can be operated
smoothly by one hand
Electrical operated MANIFOLD valves
(optional)
One or more MANIFOLD valve(s) can be electrically
operated via a control box in the tractor cab. In case of
a power failure, these can only be operated manually
when the power to the valve motor is disconnected.
Quick reference decals are located on the frame near
the MANIFOLD SYSTEM for easy “in field” operation of
the valves.
Operation
1. Filling main tank through tank lid
Remove the tank lid and fill water through strainer
basket to prevent rust or other foreign particles from
entering the tank.
It is recommended to use a water supply as clean as
possible for spraying purposes.
WARNING!
DO NOT LET THE FILLING HOSE
ETC. ENTER THE TANK. KEEP IT OUTSIDE
THE TANK, POINTING TOWARDS THE
FILLING HOLE.
IF THE HOSE IS LEAD TO THE BOTTOM OF THE
TANK, AND THE WATER PUMP AT THE WATER
SUPPLY PLANT STOPS, CHEMICALS CAN BE
SIPHONED BACK AND CONTAMINATE THE WATER
SUPPLY LINES.
2. Filling flush tank (optional) through lid
The flush tank is situated at the front under the platform
and main tank. Access to the flush tank lid is at the rear
of the platform. Fill only with clean water.
Flush tank capacity (optional)
Model Liter US Gal.
750
1200
280
420
70
110