Hardi COMMANDER Classic DELTA, Инструкция

Страница: 40 / 102

4 - Sprayer setup
4.16
ATTENTION! Always reset position to neutral (pos. 2) before
folding the boom.
The pendulum effect can be adjusted to match the local topograp-
hy. For this purpose, the 2 bottom steering arms can be locked in 3
different positions. Always use the same position for both bottom
steering arms, and perform adjustments with the boom unfolded.
POSITION 1: The boom is free and will optimize suspension towards
horizontal. Use position 1 when spraying flat country.
POSITION 2: The boom follows the movements of the trailer to some
extent. Use position 2 when spraying hilly land.
POSITION 3: The boom follows the movements of the trailer to a
high extent. Use position 3 when spraying very hilly land.
Pendulum effect adjustment
When driving on slopes, the boom can be slanted in order to match
the local topography.
At delivery the boom is locked in pos. 2 (neutral) which is used
when driving on horizontal grounds.
The slanting angle is adjusted as follows and with the boom unfol-
ded:
1. Remove the linch pin (A).
2. Reset the position of the cylinder according to the holes (1, 2 or
3).
3. Secure linch pin (A) again.
Minor adjustments of the boom in order to adjust it vertically can be
done by adjusting the position of nut (B).
Hydraulic Slanting Control (optional equipment)
The Hydraulic Slanting Control enables slanting of the entire boom
hydraulically. This is advantageous when spraying along hillsides.
Slanting the boom