manualshive.com logo in svg

Hardi COMMANDER Classic DELTA, Инструкция

Поделиться
Скачать
Hardi COMMANDER Classic DELTA Скачать руководство пользователя страница 23

3 - Description

3.11

ATTENTION! If extra high accuracy are needed HARDI FILLME-
TER can be fitted as optional equipment.

Remote pressure gauge

Access to the platform is possible via the ladder. The ladder are ope-
rated as follows:

Down: Pull the handle (A) to disengage the locking device.

Up: Tilt the ladder up and it will lock automatically when it is fully
unfolded.

The platform gives access to the clean water tank lid, the main tank
lid, the top mounted suction filter and the self-cleaning filter, which
is situated on the backside of the MANIFOLD system.

The remote pressure gauge is integrated in the platform. This gauge
measures the working pressure in the boom tubes as close to the
nozzles as possible.

The outputs stated in the nozzle charts are always based on the
pressure measured at the nozzle. Always adjust pressure when cali-
brating and spraying according to readings at the remote pressure
gauge.

The actual tank level in the main tank can be observed on the tank
level indicator. The scale is displayed in litres or Imp. gal/US gal. (cer-
tain countries).

Tank level indicator

Platform

Содержание COMMANDER Classic DELTA







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды