Hardi Boss Series, Инструкция

Страница: 9 / 60

7
6. Fit the shaft to tractor
and sprayer pump.
NOTE: Female part
towards tractor.
Fit the chains to prevent
the protection guards to
rotate with the shaft.
7. To ensure long life of the
transmission shaft, try to
avoid working angles
greater than 15
°
.
8. Transmission shafts with
cone must be fitted by
tightening the Allen
screw to a torque of
40 Nm. Check again after
2 minutes use.
3. If transmission shaft must be shortened, the shaft is pulled apart. Fit
the two shaft parts at tractor and sprayer pump and measure how
much it is necesary to shorten the shaft. Mark the protection guards.
NOTE: The shaft must always have a minimum overlap 150 mm.
4. The two parts are shortened equally. Use a saw, and file the profiles
afterwards to remove burrs.
5. Grease the profiles, and assemble male and female parts again.
T259-0004
T259-0005
T259-0007