HARD Stockton N1035P, Инструкция по сборке

Страница: 4 / 16

The Head Crank Handle
The head crank handle is located on the far left of the foot end of your bed.
The head crank handle when not in use should be tucked in. This helps to
avoid damage from it hitting or getting caught on other objects when the bed
is being moved.
To use the head crank handle, pull it out from its tucked position and turn
clockwise to elevate the head section of the crib.
The head section on the beds will articulate to approximately 35 degrees,
or
17 turns of the crank handle.
NOTE: The head section of the bed will not articulate higher than the
stated 35 degrees. The crank handle will continue to turn after 17
revolutions, however it will become noticeably more di
ffi
cult. Continued
cranking will not raise the head of the bed any further, it will only put
stress on the crank handle components and eventually cause them to
break.
CRANK HANDLE USAGE
All of the Stockton or Monroe Beds for home care use made by Hard
Manufacturing have head and knee/foot elevation, as well as the Hi-Lo
feature allowing the entire mattress platform to move up and down. These
functions on our manual beds are accomplished with 3 crank handles.
Please read the information below thoroughly for proper usage of the crank
handles on your bed to prolong the life of these parts and prevent any
breakage/damage due to use error.
Head Crank Handle
Foot Crank Handle
Hi-Lo Crank Handle