HARD Stockton N1035P, Инструкция по сборке

Страница: 3 / 16

SIDE RAIL OPERATION & SAFETY
To raise or lower the side rail, using both hands lift the rail slightly then squeeze both
fi ngertip release mechanisms to disengage the trigger mechanism and adjust the rail to
the desired position.
Bed rails and raised and lowered with fi ngertip release mechanisms shown below.
To prolong the life of the trigger assembly in the side rail, it is strongly suggested to
continue to squeeze the trigger mechansim as you lower the rail to the desired height and
not release until that time. Letting the red tips of the trigger mechanism drag up and down
the slide rods by releasing the trigger mechanism too early will cause the trigger assembly
to wear prematurely and break.
The side rails trigger mechanism in the side rail must lock into place to hold up the rail
securely and safely. The red tips of the trigger assembly must be completely inserted into
the notches in the slide rods at both ends of the rail and you should barely be able to see
them if the rail is properly locked in placed. See below.
*If the trigger mechanism for the side rail fails to lock into place properly, the bed
should not be used until the trigger assembly mechansim can be replaced.