Page 13
For technical questions, please call 1-888-866-5797.
ITEM 60338
Sa
Fe
Ty
Se
Tup
Opera
Ti
O
n
Main
Tenan
C
e
Long-Term Storage
When the equipment is to remain idle for longer than
20 days, prepare the Engine for storage as follows:
1.
CLeaninG
:
Wait for Engine to cool, then clean Engine with
dry cloth.
nOTiCe:
Do not clean using water.
The water will gradually enter the Engine
and cause rust damage. Apply a thin coat
of rust preventive oil to all metal parts.
2.
FueL:
To protect the fuel tank during storage, fill the tank
with with the proper mixture (50:1) of
stabilizer-
treated
unleaded gasoline and 2-cycle oil
Refer
to
Checking and Filling Fuel
on page 11.
WarninG!
TO preVenT SeriOuS
inJury FrOM Fire:
Fill tank in a well-ventilated area away from
ignition sources. If the engine is hot from
use, shut the engine off and wait for it to
cool before adding fuel. Do not smoke.
3.
LuBriCaTiOn:
a. Clean out area around spark plug.
Remove spark plug and pour one tablespoon of
engine oil into cylinder through spark plug hole.
b. Replace spark plug, but leave
spark plug cap disconnected.
c. Pull Starter Handle to distribute oil in cylinder.
Stop after one or two revolutions when you
feel the piston start the compression stroke
(when you start to feel resistance).
4.
STOraGe area:
Cover and store in a dry, level, well-ventilated
area out of reach of children. Storage area should
also be away from ignition sources, such as
water heaters, clothes dryers, and furnaces.
nOTiCe:
During extended storage periods the
Engine must be started every 3 months and allowed
to run for 15 – 20 minutes or the Warranty is VOID.
5.
aFTer STOraGe:
Before starting the Engine during or after
storage, keep in mind that untreated gasoline
will deteriorate quickly. Drain the fuel
tank and change to fresh fuel if untreated
gasoline has been sitting for a month, if
treated gasoline has been sitting beyond the
fuel stabilizer’s recommended time period,
or if the Engine does not start.