SKU 65330
For technical questions, please call 1-800-444-3353.
Page 3
Keep bystanders, children, and visi-
d.
tors away while operating the Shop
Press.
Distractions are able to result
in the loss of control of the tool.
Personal safety
Never exceed the recommended
a.
110
to 120 PSI
working pressure and
20
ton
pressing capacity for this Shop
Press. This Press will do the job bet-
ter and safer at the PSI and pressing
capacity for which it was designed.
Make sure to read and understand all
b.
instructions and safety precautions as
outlined in the manufacturer’s service
manual for the workpiece you are
pressing. Always use the manufac-
turer’s recommended pressing points,
minimum/maximum pressing force
required, etc., for the workpiece you
are pressing.
Prior to using the Shop Press, make
c.
sure tool trays, stands, and all other
tools and equipment are removed
from the Working Bed.
Always keep your hands and fingers
d.
safety away from the Press Head
and Filter Crushing Head during the
pressing process.
Never attempt to remove a workpiece
e.
stuck in the moving parts of the Shop
Press while it is connected to its air
supply source.
Once contact between the Press
f.
Head or Filter Crushing Head and the
workpiece has been made, step away
as far as possible and continue to
slowly apply pressure until the proce-
dure is completed.
Never leave a compressed workpiece
g.
unattended. Whenever a workpiece
is compressed, there is a very large
amount of force that has been stored
in the workpiece which must be con-
trolled until the Press Head or Filter
Crushing Head is relaxed.
Always release a load from the Shop
h.
Press, and disconnect the unit from
its air supply source before perform-
ing any services or maintenance on
the unit.
Stay alert. Watch what you are doing
i.
and use common sense when operat-
ing the Shop Press. Do not use the
Press while tired or under the influ
-
ence of drugs, alcohol, or medication.
A moment of inattention while oper-
ating the Press increases the risk of
injury to persons.
Dress properly. Do not wear loose
j.
clothing or jewelry. Contain long hair.
Keep hair, clothing, and gloves away
from moving parts. Loose clothes,
jewelry, or long hair increases the risk
of injury to persons as a result of be-
ing caught in moving parts.
Avoid unintentional starting. Be sure
k.
the Lever on the Valve Body of the
Air/Hydraulic Jack is off before con-
necting to the air supply.
Remove adjusting keys and wrench-
l.
es before connecting to the air sup-
ply.
A wrench or a key that is left
attached to a moving part of the Shop
Press increases the risk of personal
injury.
Do not overreach. Keep proper foot-
m.
ing and balance at all times. Proper
footing and balance enables better
