Page 15
For technical questions, please call 1-888-866-5797.
Item 58672
Sa
Fety
Opera
ti
O
n
Maintenance
Setup
Operating instructions
read the entire iMpOrtant SaFety inFOrMatiOn section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
tool Set up
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
turn the power Switch of the tool off, wait for the motor to stop,
before adjusting tool or installing accessories.
tO preVent SeriOuS inJury FrOM acceSSOry FaiLure:
Only use accessories that are rated at or above the rpM rating of the cordless rotary tool.
Battery charging
Charge Battery Pack after unpacking and before using this tool. Follow
instructions included with Battery Pack and Charger.
assembly
1. Insert Pen Holder into the slot and
slide it down until it clicks into place.
2. Insert Flex Shaft into bottom of
unit, tighten collar securely.
Flex
Shaft
pen
Holder
collar
Mounting
1. Mount to a surface capable of supporting the
weight of the tool.
WarninG! tO preVent SeriOuS
inJury: Verify that installation
surface has no hidden utility lines
before drilling or driving screws.
a. Drill two holes 4" apart into mounting
surface. Drive two screws (sold separately)
into holes, leaving 1/4" of screws showing.
b. Place the Keyhole openings over the
screws and slide the unit down.
Keyholes