SKU 98968
For technical questions, please call 1-800-444-3353.
Page 5
Push down on Handle’s crossbar and
6.
rotate crossbar until ends fit under
Mill’s side slots. See
Figure 2
,
below.
To change Blade, press down on one
7.
end of Handle’s crossbar and slide it
out of slot.
Pull Handle out of Food Mill.
8.
Remove old Blade from Food Mill and
9.
insert new Blade.
OperatIOn
read the entIre IMpOrtant
saFeguarDs section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Clean the appliance before each use
1.
and after every susbsequent use as
explained in the “Cleaning” section.
The Food Mill comes with three inter-
2.
changeable blades. Each blade has
its own level of cutting:
Fine blade (3):
For Purees
Medium blade (4) :
For Sieve cutting
that filters seeds and peels
coarse blade (5):
To rice potatoes
and grate tomatoes.
Once the proper blade is inserted in
3.
the Food Mill and the Handle at-
tached, set the Food Mill above the
pot or bowl.
Position Food Mill so that the sides
4.
of the pot fit into the lips along the
bottom of each leg. This will allow
for extra stability while the Handle is
turned during grating or cutting.
please note:
Do not set Food Mill
on any pot or bowl wider than 10” in
diameter.
InspectIOn anD
MaIntenance
tO preVent
serIOus Injury
FrOM appLIance FaILure:
Do not use damaged
appliances.
beFOre each use,
1.
inspect the
general condition of the Food Mill.
Check for misalignment or binding
of moving parts, cracked or broken
parts, and any other condition that
may affect its safe operation.
Keep clean and store in a secure
2.
location out of the reach of children.
Figure 2
Blade (5)
Crossbar
Side slot
Side slot
Handle
