SKU 98855
For technical questions, please call 1-800-444-3353.
Page 2
IMportant saFetY InForMatIon
safety precautions
Wear ANSI-approved safety goggles during
1.
battery replacement.
Properly install battery according to indicated
2.
polarity and properly recycle used battery.
Do not install Battery (2) without using Bat-
3.
tery Holder (3).
This product is not a toy. Do not allow chil-
4.
dren to play with or near this item.
Use for intended purposes only.
5.
Inspect before use; do not use if damaged.
6.
Maintain product labels and nameplates.
7.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
read entIre IMportant saFetY
InForMatIon section including all
text under subheadings therein before
set up or use of this product.
replacing Battery
Pull Batter Holder (3) out from side of Clock.
1.
See
Figure 1
, below.
Remove old Battery (2) and properly recycle.
2.
Insert new 3V, CR2025 Lithium battery into
3.
Battery Holder (3). Make sure side with cells
faces up.
Slide Holder into battery chamber until it
4.
snaps in place. Do NOT insert Battery into
chamber without Holder.
please note:
You may need to keep finger
pressed down on Battery while sliding Holder
into chamber. Battery may slide out during
insertion.
operation
Clock controls (C/F, Mode, Alarm, Set, Up,
1.
Down) are located on base of Clock.
Use
2.
c/F
button to switch temperature setting
from Celsius to Fahrenheit display.
Use
3.
Mode
button to switch from various
display settings (Time, Alarm, Month-Date-
Date-Temp, Timer.)
Use
4.
alarM
button to set alarm. Also press
to shut of Alarm once it sounds
Use
5.
set
to change time, date or day in set-
tings. Use
up
or
down
to change numbers
in each setting. Once a date, time or number
is found, press
set
again.
parts lIst & dIagraM
part
description
Qty.
1
Clock
1
2
Battery
1
3
Battery Holder
1
record serial number Here:
note:
If product has no serial number, record month and year
of purchase instead.
note:
Some parts are listed and shown for illustration pur-
poses only, and are not available individually as replace-
ment parts.
please read tHe FolloWIng careFullY
THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROVIDeD THe PARTS
LIST AND ASSeMBLy DIAgRAM IN THIS DOCUMeNT AS A ReFeReNCe
TOOL ONLy. NeITHeR THe MANUFACTUReR OR DISTRIBUTOR MAKeS ANy
RePReSeNTATION OR WARRANTy OF ANy KIND TO THe BUyeR THAT He
OR SHe IS qUALIFIeD TO MAKe ANy RePAIRS TO THe PRODUCT, OR THAT
He OR SHe IS qUALIFIeD TO RePLACe ANy PARTS OF THe PRODUCT. IN
FACT, THe MANUFACTUReR AND/OR DISTRIBUTOR exPReSSLy STATeS
THAT ALL RePAIRS AND PARTS RePLACeMeNTS SHOULD Be UNDeRTAKeN
By CeRTIFIeD AND LICeNSeD TeCHNICIANS, AND NOT By THe BUyeR. THe
BUyeR ASSUMeS ALL RISK AND LIABILITy ARISINg OUT OF HIS OR HeR
RePAIRS TO THe ORIgINAL PRODUCT OR RePLACeMeNT PARTS THeReTO,
OR ARISINg OUT OF HIS OR HeR INSTALLATION OF RePLACeMeNT PARTS
THeReTO.
Clock (1)
Battery (2)
Battery Holder (3)
Figure 1
1
2
3
