SKU 98412
For technical questions, please call 1-800-444-3353.
Page 2
Important saFetY
InFormatIon
assembly precautions
contains sharp blades; keep away from
1.
children.
Assemble only according to these instruc-
2.
tions. Improper assembly can create haz-
ards.
Clean thoroughly with warm water and soap
3.
before first use and after each subsequent
use.
Do not use in dishwasher; hand wash only.
4.
Use with apples only.
5.
Wear ANSI-approved safety goggles during
6.
setup and use and heavy-duty work gloves
during blade replacement.
Do not overtighten clamp.
7.
Mount only to flat, level and stable surface to
8.
support weight of Apple Peeler.
Use only on one apple at a time.
9.
Keep assembly/usage area clean and well lit.
10.
Do not assemble when tired or when under
11.
the influence of drugs or medication.
Use for intended purpose only.
12.
Inspect before use; do not use if parts are
13.
loose or damaged.
Do not use with dull or worn blades.
14.
Maintain product labels and nameplates.
15.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
read the entIre Important
saFetY InFormatIon section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
assembly
Use a screwdriver (not included) to thread
1.
the Handle Screw (8) through the Crank
Handle (2) and fasten Handle to the Peeler
Frame (1). See
Figure 1
, above.
Mount Peeler Frame (1) to solid, stable sur-
2.
face such as a counter or tabletop by tighten-
ing the Clamp (3) around table edge. See
Figure 2
, below.
Check positions of Three-Prong Fork (4) and
3.
Core Slicer Blade (5). They should align with
Core Slicer Blade facing the centered Three-
Prong Fork. See
Figure 3,
below.
Figure 1
Handle Screw (8)
Crank Handle (2)
Figure 2
Clamp (3)
Clamp
Handle
Peeler Frame
(1)
Figure 3
Three-Prong Fork (4)
Core Slicer
Blade (5)
Peeler Frame (1)