SKU92578
For technical questions, call 1-800-444-3353
Page 6
3.
Look through the Eyepiece (a)
(See Figure B). You should see a green
glow if the scope is working properly. The image will gradually fade
out, as the Scope shuts off automatically. Press the Power Button (7)
again to refresh, if the image fades before you are done viewing.
Replace Lens Cap (9) immediately.
Operation With Illuminator
1.
Remove the Lens Cap (9) and turn on and refresh the Power
Button (7).
2.
When operating in total darkness use the built in Illuminator:
Continually press the Illuminator Button (8).
(See Figure C).
(Note: The Illuminator uses more battery power so battery
will not last as long with the Illuminator on).
When finished viewing, stop pressing the Illuminator
Button (8).
3.
When finished, replace the Lens Cap (9) immediately and store the
Scope (1) in the Nylon Carrying Bag (4).
Scope
Eyepiece
Figure B
Lens
Cap (9)
Adapter Rail (2)
Washer (10)
Screw (11)
Power
Button (7)
Illuminator
Button (8)
Figure C