SKU 92500
For technical questions, please call 1-800-444-3353
PAGE 2
pRODuCT speCIFICATIONs
Electrical Requirements
110 V~, 60 Hz, 2 A
Indicators
Red LED - Power
Green LED - Ready
External Fuse
3.15A250V Glass Tube
Motor
Synchronous
Power Plug
3 Prong, Grounded
Maximum Laminating Width
12”
Maximum Document Thickness
.6mm (.024”)
Maximum Film Thickness
0.0030”-0.0040”
Laminating Speed
Approx. 12” Per Minute
Heat Dial Increments
1 To 10
Warm Up Time
5 to 10 Minutes
Maximum Temperature
350° Fahrenheit
Overall Dimensions
18” L x 8-1/4” W x 4” H
Weight
8.4 Pounds
uNpACKINg
When unpacking, check to make sure all the parts shown on the
parts List
on
page
11
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
sAVe THIs MANuAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
geNeRAL sAFeTY RuLes
WARNINg!
ReAD AND uNDeRsTAND ALL INsTRuCTIONs
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
sAVe THese INsTRuCTIONs
WORK AReA
Keep your work area clean and well lit.
1.
Cluttered benches and dark areas invite
accidents. Keep the work area well lit. Always keep the work area free of obstruc-
tions, grease, oil, trash, and other debris.
