SKU 92500
For technical questions, please call 1-800-444-3353
PAGE 7
exTeNsION CORDs
Grounded
1.
tools require a three wire extension cord.
As the distance from the supply outlet increases, you must use a heavier gauge
2.
extension cord. Using extension cords with inadequately sized wire causes a seri-
ous drop in voltage, resulting in loss of power and possible tool damage.
(see Table A.)
The smaller the gauge number of the wire, the greater the capacity of the cord. For
3.
example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(see Table A.)
When using more than one extension cord to make up the total length, make sure
4.
each cord contains at least the minimum wire size required.
(see Table A.)
If you are using one extension cord for more than one tool, add the nameplate
5.
am-
peres and use the sum to determine the required minimum cord size.
(see Table A.)
If you are using an extension cord outdoors, make sure it is marked with the suffix
6.
“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
Make sure your extension cord is properly wired and in good electrical condition.
7.
Always replace a damaged extension cord or have it repaired by a qualified electri-
cian before using it.
Protect your extension cords from sharp objects, excessive heat, and damp or wet
8.
areas.
ReCOMMeNDeD MINIMuM WIRe gAuge FOR exTeNsION CORDs*
(120 OR 240 VOLT)
NAMepLATe
AMpeRes
(at full load)
exTeNsION CORD LeNgTH
25 Feet
50 Feet
75 Feet
100 Feet 150 Feet
0 – 2.0
18
18
18
18
16
2.1 – 3.4
18
18
18
16
14
3.5 – 5.0
18
18
16
14
12
5.1 – 7.0
18
16
14
12
12
7.1 – 12.0
18
14
12
10
-
12.1 – 16.0
14
12
10
-
-
16.1 – 20.0
12
10
-
-
-
TABLe A
* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
