SKU 91729 For technical questions, please call 1-800-444-3353.
Page 3
9.
Replacement parts. When servicing, use only identical replacement parts. Use
of any other parts will void the warranty.
10. Warning: Locate the 3 Shelf Wooden Rack in a spot that is flat without an
uneven surface.
11.
Always distribute objects on Shelves evenly. Uneven weight distribution
could cause toppling. Do not allow children to climb on the Shelves or play
with the wooden rack.
Warning: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the following parts are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
Assembly Instructions
1.
Assemble all parts on a smooth surface to avoid scratching. Hardware is
provided.
2.
Set the Side Walls (1) on the floor. Each Shelf (2) is to have the Back Stop
(3) attached. If not preassembled, attach with Wood Screws (4) in the
predrilled holes.
(See Figure A).
Back Stops (3)
Shelf (2)
Figure A
3.
Attach each Side Wall (1) to the Three Shelves (2) with the Wood Screws
(4) in the predrilled holes. Do not tighten Screws (4) completely until all the
Shelves (2) are assembled. Check that all is level and then tighten all
Screws (4).
(See Figure B).
4.
A varnish or stain may be applied after assembly. Avoid too much moisture
on the shelving unless you use a waterproof bar finish. Avoid tipping
assembled Shelves.
Figure B
Side Wall (1)
Wood Screws
(4)
Shelf (2)
