SKU 91006
Page 3
2.
Observe work area conditions. Do not use safe in damp or wet locations.
Don’t expose to rain. Keep work area well lit. Do not use electrically powered
safes in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not
let them handle safe without supervision.
4.
Safe must be mounted in a dry location to inhibit rust. Always keep safe
locked and keep override keys out of reach of children.
5.
Use the right safe for the job. Do not attempt to use a small safe to do the
work of a larger safe. There are certain applications for which this safe was
designed. Do not modify this safe and do not use this safe for a purpose for
which it was not intended. NOTE: This is not a fire-resistant safe.
6.
Do not overreach. Keep proper footing and balance at all times during
installation.
7.
Maintain safe with care. Keep safe dry and clean for better and more reliable
performance. The handle and keypad must be kept clean, dry, and free from oil
and grease at all times.
8.
Stay alert. Watch what you are doing, use common sense. Do not operate any
safe when you are tired or impaired.
9.
Check for damaged parts. Before using any safe, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician. Do not use the safe if any switch does not
operate properly.
10. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this safe. Approved accessories are available
from Harbor Freight Tools.
11. Do not install safe if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not attempt to install the safe.
12. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
