SKU 90783
PAGE 2
UNPACKING
When unpacking, check to make sure all the parts are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
Product Features:
TIME ZONE CODE TABLE
TIME DISPLAY MODE
MEASURE
KEY
SCALE
KEY
COMPASS
LIGHT
SWITCH
LIGHT
SIDE VIEW
(CLOSED)
FIGURE A
BOTTOM
VIEW
SIDE VIEW
(OPEN)
KEYBOARD
MEASURING
GEAR WHEEL
BATTERY
DOOR
The Time Display Mode :
1. Normally, the Time Display Mode is the
default mode when the Measuring Multi-
Tool is on. (See Figure B.)
2. The Clock is operational when the
last digit is counting the seconds.
(See Figure B.)
3. When the Measuring Multi-Tool is
not in the Time Display Mode, and if no Key is pressed or measurement task
performed within two minutes, the Measuring Multi-Tool will return to the default mode automatically.
(See Figure B.)
4. If the Measuring Multi-Tool is
not in the default mode, pressing the “=” Key located on the Keyboard several times
will also change it to the Time Display Mode. (See Figure A.)
5. Prior to using the Measuring Multi-Tool, you must reset the Time and Time Zone Code according to the
nearest city
to you as shown below. (See Figure C.)
AM
12:00 15
FIGURE B
TIME ZONE CODE TABLE
0 DENVER 1 SYDNEY 2 WELLINGTON 3 HONOLULU 4 KARACHI 5 BANGKOK
6 HONG KONG 7 LONDON 8 PARIS 9 CAIRO . CHICAGO + RIO DE JANEIRO
- LOS ANGELES X TOKYO MOSCOW NEW YORK
AC/ON
FIGURE C
:_
To Set The Time Zone Code: (see above table)
1. Press RESET once and “12:00 AM Honolulu” Time will be displayed on the Time Display Mode. NOTE: If you are
in a different Time Zone, input the relevant Code (number or symbol) which you can find on the Time Zone Code
Table. Then, press CE to confirm. The Measuring Multi-Tool will automatically switch to your Time Zone.
(See Figure C.)
90783 manual.p65
11/17/03, 2:34 PM
2
