Page 5
For technical questions, please call 1‑800‑444‑3353.
SKU 68770
4. Plug the Battery Pack cable into the
Battery Compartment inlet and fit the
Battery Pack in the Compartment.
5. Replace the Battery Cover and
secure with the screw.
6. Replace the Body and secure
with the four clips.
operation
1. Install the batteries in the Remote
Control and Charge the Car
Battery Pack according to the
directions on the previous page.
Install the Car Battery Pack.
2. Turn on the Car Power Switch.
3. To operate the Car, slide the trigger
forward or backward to make the
car move forward or backward.
4. Turn the Dial to make the
car turn right or left.
5. Switch off car, then switch off
remote control after use.
note:
If the vehicle does not drive
straight, adjust the steering by
rotating the steering control
on the bottom of the Car.
tip:
To drift, while driving on a smooth
surface, turn the car right or left
at high speeds to cause the rear
section to drift while turning.
