Page 6
For technical questions, please call 1‑800‑444‑3353.
SKU 68770
Maintenance
to pReVent InjuRY:
turn off the power switch of both the Remote Control and the
Car and remove the Remote Control batteries before performing
any inspection, maintenance, or cleaning procedures.
1.
BeFoRe eaCh use,
inspect the general condition of the Car and
Remote Control. Check for loose hardware, misalignment or binding of
parts, cracked or broken parts, damaged electrical wiring, and any other
condition that may affect its safe operation. Do not use if damaged.
note:
niCd Battery must be recycled or disposed of properly.
Do not short, incinerate or open Battery pack.
2.
aFteR use,
wipe external surfaces of the Remote Control and Car with a clean cloth.
WaRnIng!
If the supply cord of the charger is damaged, it must be replaced only by a
qualified service technician.
problem
possible Causes
likely solutions
Car moves slowly
or not at all.
1. No Power.
2. Batteries not installed
correctly.
3. Batteries not charged.
4. Battery Contacts dirty.
1. Be sure Power Switch is turned on.
2. Check that the Batteries in the
Remote Control and the Battery Pack
in the Car are properly installed.
3. Check that the Battery Pack is fully
charged and that the Batteries in the
Remote Control are not spent.
4. Check that the Battery Contacts are
clean and free from corrosion.
Car movement is
erratic or range
is reduced.
1. Location has too much
radio interference.
2. Other cars in the
same area are on the
same frequency.
1. Move Car to a different location.
2. Move away from Cars with
the same frequency.
troubleshooting
