background image

Page 5

       

For technical questions, please call 1-800-444-3353.

SKU 66908 / 66909

Do not use chain saw if switch does 

c. 

not turn it off.
Do not operate a chain saw that 

d. 

is damaged, improperly adjusted, 

or is not completely and securely 

assembled. Be sure that the saw 

chain stops moving when the trigger 

is released.

guard against Kickback.

14. 

WARNING: KICKBACK may occur 

when the nose or tip of the guide bar 

touches an object, or when the wood 

closes in and pinches the saw chain 

in the cut. Tip contact in some cases 

may cause a lightning fast reverse 

reaction, kicking the guide bar up and 

back towards the operator. Pinching 

the saw chain along the top of the 

guide bar may push the guide bar 

rapidly back towards the operator. 

Either of these reactions may cause 

you to lose control of the saw which 

could result in serious injury to the 

user.

the following precautions should 

be followed to minimize kickback:

Grip Saw Firmly. 

a. 

Hold the chain saw firmly with both 

hands when the motor is running. 

Use a firm grip with thumbs and 

fingers encircling the chain saw 

handles.
Do not over reach.

b. 

Keep proper footing and balance at 

c. 

all times.
Don’t let the nose of the guide bar 

d. 

contact a log, branch, ground or 

other obstruction.
Don’t cut above shoulder height.

e. 

Use devices such as low kickback 

f. 

chain, guide bar nose guards, chain 

brakes and special guide bars that 

reduce the risks associated with 

kickback.
Only use replacement bars and 

g. 

chains specified by the manufacturer 

or the equivalent.

Do not touch Guide Bar Nose 

15. 

to any object.  Tip contact may 

cause guide bar to move suddenly 

upward and backwards.
Use only identical Oregon

16. 

®

 Chain 

and bar replacement components.
Inspect before every use; do not 

17. 

use if parts are loose, missing, or 

damaged.

danger!

18. 

  People with pacemakers 

should not use chain saws.  Chain 

saws produce strong electromagnetic 

fields that can cause pacemaker 

interference or pacemaker failure.  

People with pacemakers should 

consult their physician(s) for advice. 

carbOn MOnOxide hazard 

19. 

using an engine indoors can KiLL 

YOu in Minutes. 

Engine exhaust contains carbon 

monoxide.  This is a poison you 

cannot see or smell.

NEVER use inside a home or garage, 

EVEN IF doors and windows are 

open.

Содержание 66908





































Отзывы: