![background image](http://html1.mh-extra.com/html/harbor-freight-tools/65512/65512_set-up-and-operating-instructions-manual_596501010.webp)
SKU 65512
For technical questions, please call 1-800-444-3353.
Page 10
After filing Saw Chain, immerse it in
6.
oil and wash off any chips and saw-
dust.
Cleaning and Lubrication
BEFORE EACH uSE,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, and any other condition
that may affect its safe operation.
AFtER uSE,
2.
clean external surfaces
of the tool with clean cloth. Do not
use water or solvents to clean Chain
Saw. Make sure no water enters
Chain Saw.
See
3.
Figure H
, below.
The batteries contained in the Battery
4.
Pack are nickel-cadmium (Ni-CD).
Do not dispose of Ni-CD batteries in
household waste.
Follow all local regulations regarding
5.
the proper disposal of Ni-CD batter-
ies.
6.
WARNINg! If the Charger cord
is damaged, it must be replaced
only by a qualified service techni
-
cian.
Record Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Some parts on Parts List and Diagram are listed and shown for illustration purposes
only, and are not available individually as replacement parts.
pLEASE READ tHE FOLLOWINg CAREFuLLy
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED
TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Figure I
Depth Gauge