Page 3
For technical questions, please call 1-888-866-5797.
Item 56513
Installing Batteries
Remote
1. Unscrew and remove the battery
cover on the back of the Remote.
2. Insert two AA batteries (not included)
into battery compartment,
following indicated polarity.
3. Replace the Remote battery cover.
Car
1. Unscrew and remove the battery cover
from the top of the Car. See below.
2. Insert four “AA” batteries (not included)
into the battery compartment,
following the indicated polarity.
CAUTION! Replace all batteries at
one time. All batteries must be of
the same type and charge level.
3. Place battery cover on top of the Car
and slide front tabs into place.
4. Screw cover on securely.
WARNING!
If cover does not attach
securely, do not use this toy.
Operation
Pairing Car to Remote
CAUTION!
Keep spectators a safe distance away during use.
Note:
Before each use, follow these steps to pair the Car with the Remote:
1. Ensure that both the Car and
Remote are turned off.
2. Locate power switch at the back
of the Car and turn on.
Power
Switch
3. Place Car on a flat surface and stand behind
it with the tail pointing towards you.
4. Point the Remote towards the Car and turn
Remote on. The red light will flash once,
indicating that the pairing was successful.
5. Operate the Remote’s control sticks
to make sure the Car is working.
Note:
If the Remote’s red light flashes
continuously and the Car does not move,
make sure that batteries are inserted
properly. Repeat pairing process.
Note:
Electronic equipment or other radio
control devices may affect the performance
of your Amphibious Car. Find an area free
of such interference when operating Car.