7
ASSEMBLY INSTRUCTIONS
Temporarily place fixture (A) over mounting plate
(AA) to determine amount of adjustment necessary
for fixture screws (CC).
NOTE:
Fixture screws (CC)
should come through holes in fixture (A) just
enough so decorative nuts (DD) fit flush against
fixture (A) when mounted. Once fixture screws (CC)
are adjusted, use pliers (not included) to tighten
nuts (EE) securely against mounting plate (AA).
Set fixture (A) aside.
5.
5
Outlet Box
A
CC
DD
EE
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
6a
6a.
AA
Hardware Used
Fixture Screw
x 2
CC
Decorative Nut
x 1
DD
Mounting Plate
[
not shown actual size
]
x 1
AA
Nut
x 2
EE
